ZKTeco F18 User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 67 -
device ID).
2. Download user data
Save all users’ information and fingerprint in the device to U disk.
Operation:
Insert USB flash disk into USB slot of the device, press “▲/▼” to
download user, then user.dat (user information) and template.dat
(fingerprint template) will be saved in U disk.
6.2 Upload data
1. Upload user data
Upload user information and fingerprint saved in U disk to device.
Operation:
Insert U disk into USB slot of fingerprint sensor. Press “▲/▼” to select
upload user data, then press OK, and user.dat（user information) and
template.dat（fingerprint template) in U disk will be uploaded to the
device. If there are no such files, “data copy error” will appear.
2. Upload user defined picture
Upload JPG picture started with “ad_” in U disk to the device. Then this
picture will be displayed on initial interface. (Refer to appendix 10.4 )
Operation:

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm