ZKTeco F18 User Manual

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 55 -
Time format: Time format displayed on initial interface. Press / to
set 24H or 12H.
Date format: Press
/ to select format. The fingerprint sensor
supports ten date format: YY-MM-DD, YY/MM/DD, YY.MM.DD,
MM-DD-YY, MM/DD/YY, MM.DD.YY, DD-MM-YY, DD/MM/YY,
DD.MM.YY and YYYYMMDD. Select your desired date format. Press
/ to set 24H or 12H.
Keyboard voice: Press
/ to set whether the key has voice or not.
“Yes” means having voice, and “No” means no voice.
Voice prompt: Press
/ to select whether to give voice prompt or
not. The device will give corresponding voice prompt during Operation.
Volume: Press
/ to set it.
Attendance record alarm: when the free space reaches the set value,
the device will give alarm automatically (effective value is 0～99,0
means the space is all used and there is no alarm. )
Repeat verification time: it is in the set time range（unit: Minute). If
somebody’s attendance record has been there, then the record of second
attendance won’t be saved. (effective value is 0～60 minutes. 0 means
all the records after verification are saved.)
Operation:

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm