ZKTeco F18 User Manual

F18 User Manual V1.0
- 62 -
Fingerprint image display: Select whether to display the fingerprint
image on the screen when it is enrolling or verifying there are 4 options:
display upon both enrollment and verification, only display upon
enrollment, only display upon verification, not display upon enrollment
and verification.
Lock power-off: To prevent hostile power-off, select whether to lock
power-off or not.
“Disable”: the power is off 3 seconds after pressing power-off.
“Enable”: it is ineffective after pressing power-off.
Language: To choose the display language.
Master Slave: Select whether to establish master slave connection or
not.
Push: Select whether to use the PUSH function or not.

ZKTeco F18 Specifications

General

Type	Basic access control reader
Product color	Gray
Number of users	1 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
Display type	TFT-LCD
DC voltage range	0 - 12 V
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	183 mm
Width	80 mm
Height	42 mm