ZKTeco K Series User Manual

K Series Economic Models User Manual
9
The devices have an embedded ID and Mifare card module, providing the Card verification function.
Press▼ key to select Enroll Card
and press [M/OK] key to enter the
Enroll Card interface.
Swipe your card properly in the
swiping area.
Read Successfully!
3.1.5 Verification Type
3.1.6 Select Department 
Some devices have this function, you can select department that the new added user belongs to.
Press ▼ key to select Dept. Press
key to select department.
3.1.7 Select Privilege Settings
You can select privilege of the new added employee as Administrator or User in Purview option.
Administrator: An administrator is granted rights to operate all menus in addition to the fingerprint- and password- and
card-based attendance recording.
User: User is only allowed to record attendance through fingerprint, password or card verification and query attendance
Press ▼ key to select VerType, and Press ◄/► key to select Verification Type.
There are 15 types for verification by default: FP/PW/RF, FP, PIN, PW, RF,
FP/PW, FP/RF, PW/RF, PIN&FP, FP&PW, FP&RF, PW&RF, FP&PW&RF,
PIN&FP&PW, FP& (RF/PIN).

ZKTeco K Series Specifications

General

Brand	ZKTeco
Model	K Series
Category	Scanner
Language	English