ZKTeco KF1000 Series User Manual

KF1000 Series User Manual
P a g e |
40
Copyright©2022 ZKTECO CO., LTD. All rights reserved.

Cloud Server Address: This is the IP address after the software installation.

Cloud Service Port: Default is 8088.
5.2Add Device on the Software
Add the device by searching. The process is as follows:
1. Click [Access] > [Device] > [Device] > [Search] to search the device on
the software. When an appropriate server address and port is set on the
device, the searched devices are then displayed automatically.
2. Click [Add] in an operation column, a new window will pop-up. Select
Icon Type and Area from each dropdown and then click [OK] to add the
device.

ZKTeco KF1000 Series Specifications

General

Brand	ZKTeco
Model	KF1000 Series
Category	IP Access Controllers
Language	English