Zodiac T3 Instructions For Installation And Use

11
3.3 I Operaon
• To avoid serious injury, ensure the lter pump is not operang.
• Do not place your hair, loose clothing or jewellery etc. in the vicinity of the open end of the
hose.
3.3.1 Connecng and immersing the cleaner
• Immerse the cleaner so that it becomes lled with water.
• When no more air bubbles are released from the cleaner, connect the hose to the cleaner (see image ).
• Wait for the cleaner to sink to the boom of the pool.
3.3.2 Filling the hoses
• Temporarily disconnect the hose from the sucon port or skimmer.
• Start the lter pump.
• Fill the hose with water by placing the end in front of a discharge nozzle unl it is completely full.
• Stop the lter pump and connect the hose back to the sucon port or skimmer.
• Start the pump to switch on the cleaner.
3.4 I Opmising performance
The cleaner follows the filter pump's activation cycles, aspirating and cleaning the entire surface area of the pool by
way of random movements. The rate of coverage of the cleaner depends on the shape of the pool and the water flow
rate available. Adjustments may be necessary in some pools in order to optimise the rate of coverage.
3.4.1 Balancing the hose
• A correctly balanced hose must form a 45° angle between the cleaner and the boom of the pool.
Incorrect hose balancing* Correct hose balancing Incorrect hose balancing*
*See §5.1 I Appliance behaviour.
EN

Zodiac T3 Specifications

General

Pool Type	In-ground
Warranty	2 years
Pool Surface	Concrete, tile, vinyl, fiberglass
Cleaning Coverage	Floor and walls
Power Source	Pool Filtration System
Weight	18.5 lbs
Type	Suction-side pool cleaner