Zodiac Vortex EC11 - I Starting the Cleaning Cycle

12
3.7 I Seng the me and programming the cleaning cycles (depending on the model)
• Do not disconnect the power cable once the me has been programmed or you will lose it. The
me seng will be saved for approximately 2 minutes if the power supply is disconnected.
3.7.1 Seng the me
HOURS
The hours start to ash
Select the hour with
or
Press to conrm,
Tip: check the me seng
Stopping the appliance if a cleaning cycle is in progress. Press .
The me is displayed for 5 seconds.
DAY
Press for 3 seconds
The days of the week then the
LEDs start to ash.
Select the day with
or
Press to conrm,
MINUTES
The minutes start to ash
Select the minutes with
or
Press to conrm,
Exit the menu by pressing
or
EN