Zodiac Vortex EC11 - I the Remote Control (Depending on the Model)

16
4.2 I Cleaning the propeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when maintaining the propeller .
• Loosen the screw on the grid (see image ).
• Remove the grid (see image ).
• Remove the ow guide carefully (see image ).
• To remove the propeller, wear gloves and hold the end of the propeller carefully when pushing it (see image ).
• Remove all debris (hair, leaves, stones, etc.) which may be blocking the propeller.
EN