EasyManua.ls Logo

Zodiac Vortex EC11 - ❸ Use; I Immersing the Cleaner; I Operating Principle; I Pool Preparation

Zodiac Vortex EC11
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
3.5 I Starng the cleaning cycle
Respect the following instrucons to avoid any risk of injury or damage to the equipment:
Bathing is prohibited when the appliance is in the pool.
Do not use the appliance during shock chlorinaon.
Do not leave the appliance unaended for an extended period.
Do not use the appliance if the roller shuer is closed.
When the control box is powered up, the following symbols light up to indicate:
- The acon in progress
- The cleaning mode selected
- Maintenance required
The control box switches to standby aer 10 minutes and the screen is switched o. Press any key to exit standby
mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
3.5.1 Cleaning cycle selecon (depending on model)
A cleaning cycle is already congured by default: the symbols are on and the cleaning me appears on the screen, for
example: (depending on the model)
The cleaning cycle can be selected at any me, before the appliance starts or while it is operang. The new cycle will
be launched instantly and the remaining me countdown will be reinialised.
The cleaner adapts its movement strategy depending on the choice in order to opmise the coverage rate.
Surface to clean Pool shape Cleaning intensity
Boom only Other shapes, other booms Low intensity
Boom + sides + water line Flat boomed rectangular Intensive
Waterline only
3.5.2 Launching the cleaning cycle
Press
Tip: to improve the cleaning performance
At the start of the bathing season, launch several cleaning cycles in boom only mode (aer removing the
large debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the lter less clogged.
3.5.3 Adjusng the cleaning me (depending on model)
You may reduce or increase the me for the cleaning cycle selected or in progress:
- : Reduce by 30 minutes.
- : Increase by 30 minutes.
Press to conrm.
EN

Other manuals for Zodiac Vortex EC11

Related product manuals