10
3.5 I Star ng the cleaning cycle
To prevent risk of injury or property damage, be sure to adhere to the following:
• Bathing is prohibited when the appliance is in the pool.
• Do not use the appliance during shock chlorina on.
• Do not leave the appliance una ended for an extended period.
• Do not use the appliance if the roller shu er is closed.
• When the control box is powered up, the following symbols light up to indicate:
- The ac on in progress
- The cleaning mode selected
- Maintenance required
• The control box switches to standby a er 10 minutes and the screen is switched off . Press any key to exit standby
mode. Standby mode does not stop the appliance if it is in a cleaning cycle.
3.5.1 Cleaning cycle selec on (depending on model)
• A cleaning cycle is already confi gured by default: the symbols are on and the cleaning me appears on the screen, for
example: (depending on the model).
• The cleaning cycle can be selected at any me, before the appliance starts or while it is opera ng. The new cycle will
be launched instantly and the remaining me countdown will be reini alised.
• The cleaner adapts its movement strategy depending on the choice in order to op mise the coverage rate.
Surface to clean Pool shape Cleaning intensity
Bo om only Other shapes, other bo oms Low intensity
Bo om + sides + water line Flat bo omed rectangular Intensive
Waterline only
3.5.2 Launching the cleaning cycle
• Press
Tip to improve cleaning performance
At the start of the bathing season, launch several cleaning cycles in bo om-only mode (a er removing large
debris with a net).
Regular use of the cleaner (without exceeding 3 cycles per week) means that your pool will always be clean
and the fi lter less clogged.
3.5.3 Adjus ng the cleaning me (depending on model)
• You may reduce or increase the me for the cleaning cycle selected or in progress:
-
: Reduce by 30 minutes.
-
: Increase by 30 minutes.
• Press
to confi rm.
EN
To Next Page
Loading...
Need help?
General
