13
MINUTES
The minutes start to fl ash
Select the minutes with or
(every 1/4 hour)
Press to confi rm,
Exit the menu by pressing
or
3.7.2 Programming cleaning cycles
Program up to 7 cleaning cycles (for example, 2 days per week: Wednesdays and Saturdays over 4 weeks).
• You must set the me before you program the cleaning cycles, see § “3.7.1 Se ng the me”.
• Start by selec ng the cleaning cycle on the control box, see § “3.5.1 Cleaning cycle selec on (depending on model)”.
• Then program the days, hours and minutes.
DAY
Press for 3 seconds
The days of the week fl ash twice.
The LED and the current
date and me fl ash to remind you.
Press to start programming
Select the day with
or
Press to confi rm,
HOURS
The hours start to fl ash
Select the hour with
or
Press to confi rm,
To cancel a day's programming,
hold down
un l the
display changes.
• The programming stops automa cally at the end of the 7th cleaning cycle and the LED switches off .
• To cancel ALL the programming, exit the menu and hold down un l the display changes.
Tip: check the programming
Press
. Each programming is displayed for 3 seconds.
To Next Page
Loading...
Need help?
General
