INSTRUCTION MANUAL
To
get the most out of the many functions of this machine and operate it in safety, it is necessary
to use this machine correctly.
Please read this Instruction Manual carefully before use.
We
hope you will enjoy the use of
your machine for a long time.
Please remember to keep this manual in a safe place.
1.
Observe the basic safety measures, including, but not limited to the following ones, whenever
you use the machine.
2.
Read all the instructions, including, but
not
limited to this Instruction Manual before you
u
se
the m
ac
hi
ne
, In
add
iti
on
,
keep
this
Instruction
Manual
so
that you may read
it
at
anytime when necessary.
3. Use the machine after it has been ascertai
ned
that it conforms with safety rules/standards
valid
in
your country.
4.
All safety devices must be in position when the machine is ready for work
or
in operation.
The operation without the specified safety devices is not allowed.
5.
Th
is machine shall be operated by appropriately-trained operators.
6. For your personal protection, we recommend that you wear safety glasses.
7. For the following, turn off the power switch
of
disconnect the power plug
of
the machine from
the receptacle.
7-1
For threading needle (s) and replacing bobbin.
7-2 For replacing part (s)
of
needle, presser foot, throat plate, feed dog, cloth guide etc.
7-3 For repair work,
7-4 When leaving the working place of when
the
working place is unattended.
8.
If
you should allow oil, grease, etc. used with the machine and
dev
ices to come in contact
with
your
eyes
or
skin
or
swallow
any
of
such liquid by mistake, immediately wash
the
contacted areas and consult a medical doctor.
9. Tampering with the live parts and
dev
ices. regardless
of
whether the machine is powered,
is prohibited.
10. Repairing, remodeling and adjustment works must only be done
by
appropriately trained
technicians or specially skilled personnel.
11
. General
ma
intenance and inspection works
ha
ve to
be
done by appropriately trai
ned
personnel.
12. Repair and maintenance works of electrical components shall be conducted by qualified
electric technicians
or
under the audit and gu dance
of
specia
ll
y skill
ed
personnel.
Whenever your find a failure
of
any
of
electrical components, immediately stop the machine.
13.
Periodically clean
thE
! machine throughout the pe
ri
od
of
u
se
.
- 12 -
From the library of: Superior Sewing Machine & Supply LLC
To Next Page
Loading...
