FOR SAFE OPERATION
~
1. To avoid electrical shock hazards, neither open the cover
of
the electrical box
for
the motor nor touch the components mounted inside the electrical box.
&
1. To avoid personal injury, never operate the machine with any
of
the
belt
cover, finger guard
of
safety davices removed.
2.
To
prevent possible personal injuries caused by being caught in the machine.
keep
your
fingers, head and clothes away from the handwheel, V belt and
the motor
while the machine
is
in operation. In addition, place nothing around
them.
3.
To avoid personal injury, never put your hand under the needle when you
turn
"ON" the power switch or operate the machine.
4.
To
avoid personal injury, never put your fingers into the thread take-up cover
while the machine is in operation.
5.
The hook rotates at a high speed while the machine is in operation.
To
prevent
possible injury to hands, be sure to keep your hands away from the vicinity
of
the
hook
during operation. In addition, be sure to turn OFF the power to
the machine when replacing the bobbin.
6.
To avoid possible personal injuries, be careful not to allow
your
fingers in
the
machine
whe
n tiling/raising the
mac
hine head.
7.
To
avoid possible accidents because
of
abrupt start
of
the machine, turn
I
OFF
the
power
to the machine when tilting the machine head
or
removing
the
belt cover and the V be
lt.
8.
If
your machine is equipped with a serve-motor, the motor does not produce
noise
while the machine is
at
rest.
To
avoid possible accidents
due
to abrupt
start
of
the machine, be sure to turn OFF the power to the machine.
9.
To
avoid electrical shock hazards, never operate the sewing machine with
the ground wire
for
the power supply removed.
1
0.
To
prevent possible accidents because
of
electric shock or damaged electrical
I
component (s
),
tum
OFF
the power switch
in
prior to
the
connectrion/disconnecti
on
of
the power plug.
-
14-
To Next Page
Loading...
