14. Grounding the machine is always necessary fot the normal operation
of
the machine. The
machine has to be operated in an enviorment that is free from strong noise sources such
as high
-f
requency welder.
15. An appropriate power plug has to be attached to the machine by electric technicians, Power
plug has to be connected to a grounded
receptacle.
16. The machine is only
Clllowed
to
be
used for the purpose intended. Other used are not allowed.
17. Remodel or modify
t11e
machine in accordance with the safety rules/standards while taking
all the effective
safely
measures. We assumes no responsibility for
damage
caused
by
remodeling
or
modification
of
the machine.
18. Warning hints are marked with the two shown symbols.
~
~
Danger
of
injury to operator or service staff
&
l~ems
requiring special attention
-
13
-
From the library of: Superior Sewing Machine & Supply LLC
To Next Page
Loading...
