Chapter 2: Setting Security
17
9
99
9
On the
Configuration
tab, click
Apply
.
10
1010
10
Click the
Close
box to exit the configuration software.
That’s it! You have configured WPA2-PSK security for your
wireless connection, and you’re ready to use the Internet.
WPA-PSK (Pre-Shared Key)
If not all of the wireless devices in your network support the
recommended WPA2-PSK, select WPA-PSK.
5
55
5
First, make sure that the Access Point is configured for
WPA-PSK security, or that it supports both WPA2 and WPA.
6
66
6
In the
Security
Configuration
window, click the
Encryption
Mode
drop-down arrow and select
WPA-PSK
.
To Next Page
Loading...
General