Chapter 2: Setting Security
21
WPA2-Enterprise
Select WPA2-Enterprise if
•
you are linking to a corporate network that uses a RADIUS
(
R
emote
A
uthentication
D
ial-
I
n
U
ser
S
ervice)
authentication
server
•
all of the devices in the network support WPA2, or your
access point offers both WPA2 and WPA.
5
55
5
In the
Security Configuration
window, click the
Encryption
Mode
drop-down arrow and select
WPA2-Enterprise
.
6
66
6
In the
IEEE 802.1X Authentication
area, note that the
check box marked
Enable IEEE 802.1X authentication for
this network
is selected. With IEEE 802.1X authentication,
each wireless device (client) sends a signal to the wireless
access point, which in turn sends the signal to the RADIUS
To Next Page
Loading...
General