Wireless-G PCI Card24
WPA
Select WPA if you are linking to a corporate network that uses a
RADIUS (
R
emote
A
uthentication
D
ial-
I
n
U
ser
S
ervice) server
that does not support WPA2.
5
55
5
In the
Security Configuration
window, click the
Encryption
Mode
drop-down arrow and select
WPA
.
6
66
6
In the
IEEE 802.1X Authentication
area, note that the
check box marked
Enable IEEE 802.1X authentication for
this network
is selected. With IEEE 802.1X authentication,
each wireless device (client) sends a signal to the wireless
access point, which in turn sends the signal to the RADIUS
server. The server determines whether or not the client is
allowed to join the network.
To Next Page
Loading...
General