2. Turn to show the icon for the desired setting item.
Please see the linked reference sections for details about each setting.
Change the tempo. (→ Changing the
tempo)
Change the effect order. (→
Changing the order of effects)
Change the patch memory name. (→
Changing patch memory names)
Restore the patch memory to its
original settings. (→ Restoring patch
memories to original settings)
Copy and save patch memories.
(→ Copying and saving patch
memories)
Create new patch memories. (→
Creating patch memories)
Delete patch memories. (→ Erasing
patch memories)
Adjust the overall volume. (→
Adjusting the overall output level)
Turn the AUTO SAVE function on/off.
(→ Setting the AUTO SAVE function)
Turn the PRESELECT function on/off.
(→ Using the preselect function)
Set the sound used on the LIBRARY
Screen. (→ Setting the sound on the
LIBRARY Screen
）
Set the type of batteries used. (→
Setting the type of batteries used)
Adjust the backlight brightness. (→
Adjusting the backlight brightness)
Adjust the display contrast. (→
Adjusting the display contrast)
Turn the ECO mode on/off. (→
Setting the ECO mode)
Restore settings to their factory
defaults. (→ Restoring factory
default settings)
Check the firmware version. (→
Checking the firmware version)
Show a QR code for checking
MS-50G+ operation procedures.
(→ Checking MS-50G+ operation
procedures
）
13
To Next Page
Loading...
