EasyManua.ls Logo

Zoom MULTISTOMP MS-50G+ - Technical Specifications

Zoom MULTISTOMP MS-50G+
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Maximum number of
simultaneous effects
6 effects
User patch memories 100
Sampling frequency 44.1 kHz
A/D conversion 24-bit 128× oversampling
D/A conversion 24-bit 128× oversampling
Signal processing 32-bit
Frequency response 20 Hz – 20 kHz (+0.5 dB/−0.5 dB) (when 10kΩ load)
Display 160×128 dot-matrix LCD
Input INPUT Standard mono phone jack
Rated input level: −20 dBu
Input impedance (line): 470 kΩ
Outputs L/R Standard mono phone jacks
Maximum output level: +7.2 dBu (when output
impedance 10 kΩ or higher)
Input S/N 122 dB
Noise floor (residual noise) L/R –100 dBu
Power AC adapter: 9V DC 500mA center negative (ZOOM AD-16)
2 AA batteries (alkaline, lithium or rechargeable NiMH
batteries)
Estimated operation times
using batteries
• These values are
approximate.
• Battery operation
times were determined
using in-house testing
methods. They will vary
greatly according to use
conditions.
Alkaline batteries: about 7 hours
NiMH batteries (1900 mAh): about 6.5 hours
Lithium batteries: about 14 hours
USB Port: USB 2.0 Type-C/Supported cable type: Type-C
Handy Guitar Lab: USB1.1 Full Speed
• Use a USB cable that supports data transfer. USB bus
power is supported.
Dimensions 133 mm (D) × 79 mm (W) × 61 mm (H)
Weight 353 g (excluding batteries)
400 g (including batteries)
Note: 0 dBu = 0.775 V
66

Other manuals for Zoom MULTISTOMP MS-50G+

Related product manuals