■ Using an AC adapter
Use a ZOOM AD-16 AC adapter, which is specified for this unit.
When the AC adapter is connected, the MS-50G+ will power on.
3. Connect a cable to the INPUT jack.
When using batteries for power, connecting a cable to the INPUT jack will turn on the power.
This turns the MS-50G+ power on and opens the Home Screen.
4. Raise the amp volume.
ECO mode overview
• By default, ECO mode is set to ON, so the power will automatically turn off if no use occurs for 10 hours.
• ECO mode can also be turned OFF. (→ Setting the ECO mode)
Turning the power off
1. Minimize the volume of the amp.
2. Disconnect the cable from the INPUT jack.
■ If using batteries
Disconnect the cable from the INPUT jack to turn off the display and the power.
■ If using an AC adapter
Disconnect the AC adapter to turn off the display and the power.
17
To Next Page
Loading...
