Switching patch memories
The MS-50G+ manages effects in patch memories. A patch memory can have up to 6 effects and save their
on/off states and parameter settings.
1. Use and on the Home Screen to select a patch memory.
When a patch memory is selected, information about it will be shown briefly.
❶
Patch memory number
This shows the number of the selected patch memory.
❷
Patch memory name
This shows the name of the selected patch memory.
❸
Number of effects in the patch memory
This shows the number of effects in the selected patch memory.
HINT
• Up to 100 patch memories can be created.
• The MS-50G+ has a preselect function. This allows the next patch memory to be selected in advance and
then switched to with one press. This is useful when you want to switch patch memories that are not
near the current one when performing live, for example. (→ Using the preselect function)
34
To Next Page
Loading...
