Setting the AUTO SAVE function
When the AUTO SAVE function is ON, patch memories will be saved automatically when their contents are
changed.
1. Select “AUTO SAVE” on the MENU Screen.
2. Turn to switch it ON/OFF.
Setting Explanation
ON This turns on the AUTO SAVE function.
OFF This turns off the AUTO SAVE function.
3. Press .
This confirms the setting.
4. Press .
The Home Screen will reopen.
HINT
If the AUTO SAVE function is off, patch memories will not be saved automatically.
Save them as necessary. (→ Copying and saving patch memories)
56
To Next Page
Loading...
