Adjusting effects
Patch memories can be edited, including replacing effects and adjusting parameters.
Saving changes
• When the AUTO SAVE function is on, changes to patch memories will be saved automatically. (The default
setting is ON.) (→ Setting the AUTO SAVE function)
• If the AUTO SAVE function is off, patch memories will not be saved automatically. When the content of a
patch memory has been changed, will appear at the top right of the display, showing that it is
different from the saved settings. Save it as necessary. (→ Copying and saving patch memories)
Turning effects on/off
On the Home Screen, the effects used in the patch memory are shown and can be turned on and off using
the footswitch.
1. Use and on the Home Screen to select a patch memory with an effect you want to turn on/
off (→ Switching patch memories).
18
To Next Page
Loading...
