Using the tuner
Activating the tuner
Enable the tuner to use the MS-50G+ to tune a guitar.
NOTE
The tuner cannot be used when the selected effect has a special function assigned, for example, effects that
are on only while the footswitch is being pressed.
1. Press and hold .
This activates the tuner and opens the Tuner Screen.
2. Play the open string that you want to tune and adjust its pitch.
• The nearest note name and pitch detuning will be shown.
• When the pitch is correct, the left and right indicators will both be shown and the display backlight
will become green.
Closing the tuner
Press when the tuner is in use to close it and reopen the previous screen.
48
To Next Page
Loading...
