If AUTO SAVE is OFF, (→ Setting the AUTO SAVE function), “SAVE PATCH” will appear instead of “COPY
PATCH”. In this case, select “SAVE PATCH”.
4. Turn to select the patch memory where it will be copied or saved, and press .
Patch memories labeled “Empty” contain no effects.
5. Press .
This copies or saves the patch memory and reopens the Home Screen.
To cancel copying or saving, turn to select “CANCEL”, and press .
HINT
If the AUTO SAVE function is off, patch memories will not be saved automatically. (→ Setting the AUTO SAVE
function)
41
To Next Page
Loading...
