Zoom Multistomp MS-70CDR User Manual

11
Changing Patch Memories with the Footswitch
Changing Patch Memories with the Footswitch
1. Open the MEMORY list.
3. Add or remove it.
2.
Select a patch memory to add to or remove from
the footswitch (A/B) list.
1
To add or remove patch memories to a
list that the footswitch cycles through
Press
Press
Turn
HINT
t 1SFTTBOEIPMEUPSFNPWFBMMQBUDI
memories from the footswitch list.
1. Open the MEMORY list.
2. Change the patch memory.
2
To cycle through patch memories in
the list in order using the footswitch
Press
HINT
t In the example on the right,
pressing the footswitch cycles
through the patch memories in
alphabetical order like this.
[04:TiledRoom]
[01:MirageCho]
[02:CoronaTri]
[04:TiledRoom]
[01:MirageCho] …
Press
Confirm that the Home Screen is shown.

Zoom Multistomp MS-70CDR Specifications

General

Effects	86
Patches	50 user patches
Display	LCD
Input	1 x 1/4"
Output	1 x 1/4"
Pedal Type	Multi-effects
Bypass Switching	Buffered
Type	Multi-effects
Current Draw	500 mA
Simultaneous Effects	Up to 6
Power	9V DC
Effects Types	Chorus, Delay, Reverb
Power Source	9V DC
Presets	50