Zoom Multistomp MS-70CDR User Manual

16
Tapping the Tempo
Tapping the Tempo
Delay effects an d some modul a t i on effects can be
synchronized to the tempo. Select an effect that can be
synchronized, and set its Time, Rate or other parameter that
can be synchronized to a or note value.
The tempo can be set by tapping the footswitch or a knob.
1. Open the Tap Tempo Screen.
3. Complete the setting.
2. Tap the footswitch 2 or more times at the
desired tempo.
1
To set the tempo by tapping the
footswitch
NOTE
t *G ZPVQSFTT UIF GPPUTXJUDIXIFO UIF FGGFDUJT0/
the ON/OFF indicator becomes unlit and the effect
turns OFF for 1 second.
NOTE
t #ZEFGBVMUwhen pressed and held, the footswitch
is set to activate the Tuner. To tap the tempo with
the footswitch, the setting must be changed so that
it activates Tap Tempo when pressed and held.
(See page 18.)
The ON/OFF indicator flashes in time with the
tempo.
Press
and
hold
for 1 second
Press
and
hold
for 1 second

Zoom Multistomp MS-70CDR Specifications

General

Effects	86
Patches	50 user patches
Display	LCD
Input	1 x 1/4"
Output	1 x 1/4"
Pedal Type	Multi-effects
Bypass Switching	Buffered
Type	Multi-effects
Current Draw	500 mA
Simultaneous Effects	Up to 6
Power	9V DC
Effects Types	Chorus, Delay, Reverb
Power Source	9V DC
Presets	50