Zoom R8 - Connecting and Disconnecting in Audio Interface Mode; Connecting the R8 to a Computer for the First Time; R8 Setup and Connection

8
Audio interface manual
Connecting and disconnecting in audio interface mode
This is an overview of connecting and disconnecting the to a computer with a USB
cable. For details, see the included Cubase LE Startup Guide guide.
Connecting the to a computer
for the rst time
Install the Cubase LE DAW
software on the computer.
1 1
Press USB.
Install the ZOOM audio driver
on the computer from the included
SD card. (No driver is necessary for
use with Macintosh computers.)
2
Press ENTER.
Select
AUDIO I/F
.
2
Press ENTER.
Select
EXECUTE
.
4
3
☞
Reference: "Cubase LE Startup Guide"
setup and connection
Connect the
to the computer.
3
setup and connection
NOTE
• The ZOOM audio driver is essential for
using the
as an audio interface with DAW
software such as Cubase LE. (No driver is neces-
sary for use with Macintosh computers.)
• Download the latest
audio driver from the
Zoom Corporation website.
http://www.zoom.co.jp/
Device setup
Control surface setup P.10
Setup the DAW software.
4
☞
Reference: "Cubase LE Startup Guide"
Change
menu
Change
menu
Mackie Control
Connect the
to the computer
using a USB capable.