NOTES:
•
If you enter the incorrect PIN three times the nano-SIM card will be blocked.
•
When you manage your PIN code, you need to disconnect from the network first.
•
After changing the PIN code, you don’t need to input the PIN code again. The PIN code is
required every time the device is restarted.
Reset
Select Advanced Settings > Others > Reset factory settings to set all the settings to their
factory default values, and then the device will restart automatically.
Restart
Select Advanced Settings > Others > Restart Device to restart your device manually.
SNTP
Select Advanced Settings > Others > SNTP
You can set the device’s time manually or set the device to obtain time from an SNTP server
automatically. The default time set mode is Sntp auto Synchronization.
To Next Page
Loading...
