Confidential and Proprietary Information of ZTE CORPORATION 3
Installation Guide
Installing the nano-SIM Card and battery
1. Slide the back cover and remove it
2. Install the nano-SIM Card.
WARNING!
Switch off your device before installing or replacing the nano-SIM card.
Only 4FF nano-SIM card is supported for use in this device.
To avoid damaging the device, please only use the card that is provided by your service
provider and ensure that the nano-SIM card contacts are facing down when inserting it into
the nano-SIM slot.
3. Insert the battery and close the back cover.
To Next Page
Loading...
