Zte MF920VS - Wi-Fi Advanced Settings

16
 Authentication Method: The authentication methods are described below.
Mode
Description
OPEN
Authentication and encryption won't be performed. There are risks that
private info will be intercepted or network will be used by unauthorized
individuals.
WPA2-PSK
It is the securer version of WPA with implementation of the 802.11i
standard.
WPA-PSK/WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK scheme.
 Encryption Method: Select an encryption method from the drop-down list.
 Maximum Connections: Choose the maximum number of the devices which connect to your
ZTE Warp Connect simultaneously.
 Wi-Fi settings reset: Click the Reset button to reset all Wi-Fi settings to the default.
2. Click Save Changes to save your settings.
Wi-Fi Advanced Settings
Configure your hotspot's advanced Wi-Fi settings.
Caution for Using Wi-Fi Advanced Settings
These advanced settings should only be changed for specific circumstances.
1. Click Settings > Wi-Fi > Advanced to view the wireless network advanced parameters and the
WPS settings shown in the following figure.