Zte ZXR10 8900 Series - Policy Routing Configuration Example; QoS Maintenance and Diagnosis

Chapter9
policy(nat)
TableofContents:
policyadd.........................................................................95
policymodify....................................................................99
policydelete...................................................................102
policyshow.....................................................................103
policyclean....................................................................103
policymove....................................................................103
policyadd
Command
Function
ThiscommandisusedtoaddoneNATpolicy.
CommandFormatpolicyadd[srcarea<srcarea_nam>][dstarea<dstarea_
nam>][srcvlan<srcvlan_no>][dstvlan<dstvlan_no>][or
ig_src<src_addr1>][orig_dst<dst_addr1>][orig_sport
<sport_id>][orig_service<ser_id>][trans_src<src_addr2
>][trans_dst<dst_addr2>][trans_service<ser_obj>][pat
<yes|no>][enable<yes|no>][before<number>]
Parameter
Description
Parameter
Description
addAddingNATpolicy.
srcarea
Thissetssourcearea.
<srcarea_nam>
Thisisonestringandsourcearearesource
nameisinputhere.
Tips:
Thisparametervaluemustbepredefined
areaname.Oneoremoreareanamescanbe
inputhere.Asformultipleareanames,space
isusedbetweeneachtwoareanamesandall
areanamesarequotedwithsinglequotes,
suchas’area1area2’.
dstareaThissetsdestinationarea.
ConfidentialandProprietaryInformationofZTECORPORATION95