Zte ZXR10 8900 Series - Applying NP-Based ACL

Chapter8log
alarmnotice
ThisisthemanagementtoalarmmodesofFW .FWsystemcan
triggeralarmsautomaticallyaccordingtopre-denedpoliciesand
securityalarmevents.Itcansendalarminformationtoadminis-
tratorthroughloudspeaker ,email,console,SNMP ,NETBIOSand
othermodes.Hereusercansetrelatedparametersinvarious
alarmmodes.
alarmnoticeaddbeep
Command
Function
Thiscommandisusedtoaddonebeepalarm.
CommandFormatalarmnoticeadd<beep>name<string>[<default>]|[freq
<number1>length<number2>reps<number3>delay
<number4>]
Parameter
Description
Parameter
Description
addThiscommandisusedtoaddonebeepalarm.
<beep>Thisindicatesthealarmingmodeisbeep
alarm.
name
Thissetsalarmname.
<string>
Thisisastring,indicatingthenameofalarm.
<default>Thisusesthedefaultvalueofbeepalarm.
Withthisoption,thefollowingparametersare
notneeded.
freqThissetsbeepoutputfrequency.
<number1>Thisisonenumber,indicatingbeepoutput
frequency,inHZ,inrangeof1-1000HZ.
lengthThissetsbeeplength.
<number2>Thisisonenumber,indicatingbeeplength,
inmicro-seconds,inrangeof1-1000
micro-seconds.
reps
Thissetsrepeattimesofbeep.
<number3>Thisisonenumber,indicatingbeeprepeat
times,intimes,inrangeof1-1000times.
delay
Thissetstheintervaloftwobeeps.
<number4>Thisisonenumber,indicatingbeepinterval,
inmicro-seconds,inrangeof1-1000
micro-seconds.
Command
Illustration
Whentheattributeofbeepalarmissettodefault,thedefault
valuesofparametersareasfollows:
frep
440HZ
length200micro-seconds
ConfidentialandProprietaryInformationofZTECORPORATION83