Zte ZXR10 8900 Series - Usermaxlogin Set Maxnum; Usermaxlogin Show; Config; Config Implement

ZXR108900SeriesCommandManual(FWVolume)
usermaxloginsetmaxnum
Command
Function
Thiscommandisusedtosetthemaxloginnumberforthesame
oneuser .
CommandFormatusermaxloginsetmaxnum<number>
Parameter
Description
Parameter
Description
<number>
Thisisthemaxloginnumberforthesame
oneuser,inrangeof1-2000.
ExampleT osetthemaxloginnumberforthesameoneuserto4,execute
thefollowingcommand:
#usermaxloginsetmaxnum4
usermaxloginshow
Command
Function
Thiscommandisusedtoshowthemaxconcurrentloginusernum-
bersetonsystem.
CommandFormatusermaxloginshow
ExampleT oshowthemaxconcurrentloginusernumbersetonsystem,
executethefollowingcommand:
#usermaxloginshowThemaxlocationofuseris:4
config
Thissetofcommandsisusedtomanagesystemconguration.
configimplement
Command
Function
Thiscommandisusedtovalidatethecongurationsnewlyadded
tosystem.
CommandFormatconfigimplement[vsid<number>]
Parameter
Description
Parameter
Description
vsid<number>
Thisisoptional,specifyingIDofvirtual
system,0bydefault,inrangeof0-254.
Command
Illustration
Withthiscommand,thenewlyaddedcongurationsgetvalidon
deviceimmediatelybuttheyarenotsaved.Toapplythesecon-
gurationsnexttimewhenenablingFW ,itisneededtosavecon-
gurations.
146ConfidentialandProprietaryInformationofZTECORPORATION