Zte ZXR10 8900 Series - Schedule; Schedule Add (Week Cycle)

ZXR108900SeriesCommandManual(FWVolume)
CommandFormatrangeshow
ExampleT oshowalladdressranges,executethefollowingcommand:
#rangeshow
schedule
Usercanadd,modifyanddeletescheduleinmanagementofFW
schedules.
scheduleadd(WeekCycle)
Command
Function
Thiscommandisusedtoaddoneweekcycle.Weekcycleindicates
thisobjectcontainsmultipleuncontinuousregularperiodsuchas
9amto5pmeachT uesday.
CommandFormatscheduleaddname<string1>[cyctype<weekcyc>][week
<string2>][start<string3>][end<string4>]
Parameter
Description
Parameter
Description
addThisaddsonecycle.
name
Thissetsnameofcycle.
<string1>
Thisisonestring,indicatingnameofcycle.
cyctype
Thissetstypeofcycle:weekcycoryearcyc.
Theformerindicatesweekcycleandthelatter
indicatesyearcycle.
<weekcyc>Thisindicatesweekcycle,suchas8amto
8pmeachMonday.
weekThissetswhichdaysareincludedinoneweek.
<string2>
Thisisonestring,indicatingonedayinthe
week,informatof1234567(indicatingfrom
MondaytoSunday).
start
Thissetsthestarttimeinoneday.
<string3>
Thisisonestring,indicatingthestarttime,in
formatofHH:MM(hour:minute).
endThissetstheendtimeineachday.Endtime
mustbelargerthanstarttime.
<string4>
Thisisonestring,indicatingtheendtime,in
formatofHH:MM(hour:minute).
Command
Illustration
Whenspecifyingthatmultipleperiodsarecontainedintheweek,
withnoseparatoramongperiods.Forexample,12indicatesMon-
dayandTuesday.
ExampleT oaddweek1withperiodtobe10amto18pmeachWednesday,
executethefollowingcommand:
#scheduleaddnameweek1cyctypeweekcycweek3
start10:00end18:00
46ConfidentialandProprietaryInformationofZTECORPORATION