ES-2108 Series User’s Guide
115
CHAPTER 12
Bandwidth Control
This chapter shows you how you can cap the maximum bandwidth using the Bandwidth
Control screen.
12.1 Bandwidth Control Setup
Bandwidth control means defining a maximum allowable bandwidth for incoming and/or out-
going traffic flows on a port.
Click Advanced Application > Bandwidth Control in the navigation panel to bring up the
screen as shown next.
Figure 59 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 29 Advanced Application > Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to enable bandwidth control on the Switch.
Port This field displays the port number.
To Next Page
Loading...
