ZyXEL Communications ES-2108 - Table 54 RADIUS Attributes - Exec Events Via Console; Table 55 RADIUS Attributes - Exec Events Via Telnet;Ssh; Table 56 RADIUS Attributes - Exec Events Via Console

Chapter 20 Authentication & Accounting
ES-2108 Series User’s Guide
162
20.3.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the
difference between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize
the Calling-Station-Id attribute):
20.3.2.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Table 54 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name a a a
NAS-Identifier a a a
NAS-IP-Address a a a
Service-Type a a a
Acct-Status-Type a a a
Acct-Delay-Time a a a
Acct-Session-Id a a a
Acct-Authentic a a a
Acct-Session-Time a a
Acct-Terminate-Cause a
Table 55 RADIUS Attributes - Exec Events via Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name a a a
NAS-Identifier a a a
NAS-IP-Address a a a
Service-Type a a a
Calling-Station-Id a a a
Acct-Status-Type a a a
Acct-Delay-Time a a a
Acct-Session-Id a a a
Acct-Authentic a a a
Acct-Session-Time a a
Acct-Terminate-Cause a
Table 56 RADIUS Attributes - Exec Events via Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name a a a
NAS-IP-Address a a a
NAS-Port a a a
Class a a a
Called-Station-Id a a a
Calling-Station-Id a a a
NAS-Identifier a a a