ZyXEL Communications ES-2108 - Chapter 5 Initial Setup Example; Overview; Creating a VLAN; Figure 25 Initial Setup Network Example: VLAN

ES-2108 Series User’s Guide
61
CHAPTER 5
Initial Setup Example
This chapter shows how to set up the Switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 5 as a member of VLAN 2.
Figure 25 Initial Setup Network Example: VLAN