ZyXEL Communications ES-2108 - Link Aggregation ID; Link Aggregation Control Protocol Status; Figure 62 Advanced Application > Link Aggregation: Status; Table 32 Link Aggregation ID: Local Switch

Chapter 15 Link Aggregation
ES-2108 Series User’s Guide
122
15.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information
1
:
15.3 Link Aggregation Control Protocol Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link
Aggregation Control Protocol Status screen displays by default. See Section 15.1 on page
121 for more information.
Figure 62 Advanced Application > Link Aggregation: Status
The following table describes the labels in this screen.
Table 32 Link Aggregation ID: Local Switch
SYSTEM
PRIORITY
MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000
Table 33 Link Aggregation ID: Peer Switch
SYSTEM PRIORITY MAC ADDRESS KEY PORT PRIORITY PORT NUMBER
0000 00-00-00-00-00-00 0000 00 0000
1. Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
Table 34 Advanced Application > Link Aggregation: Status
LABEL DESCRIPTION
Index This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
Enabled Ports These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Aggregator ID Link Aggregator ID consists of system priority, MAC address, key, port priority and
port number. Refer to Section 15.2.1 on page 122 for more information on this field.
Status This field displays how these ports were added to the trunk group. It displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.