Chapter 18 Port Authentication
ES3500 Series User’s Guide
159
on the source MAC address of the client connecting to a port on the Switch along with a password
configured specifically for MAC authentication on the Switch.
Figure 80 MAC Authentication Process
18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) you want to use
(both on the Switch and the port(s)), then configure the RADIUS server settings in the AAA >
Radius Server Setup screen.
To activate a port authentication method, click Advanced Application > Port Authentication in
the navigation panel. Select a port authentication method in the screen that appears.
Figure 81 Advanced Application > Port Authentication
New Connection
Authentication Request
Authentication Reply
1
2
3
Session Granted/Denied
To Next Page
Loading...
