ZyXEL Communications ES3500-24 - Supported Mibs; SNMP Traps

Chapter 39 Access Control
ES3500 Series User’s Guide
294
39.3.2 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012
SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP
39.3.3 SNMP Traps
The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OID (Object ID) that begins with “1.3.6.1.4.1.890.1.5.8” is defined in private MIBs. Otherwise,
it is a standard MIB OID.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.61” are specific to the ES3500-24 switch.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.72” are specific to the ES3500-8PD switch.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.73” are specific to the ES3500-24HP switch.
Note: OIDs are common across all models unless otherwise indicated by the model
number.
Table 127 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the Switch is
turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the Switch
restarts.
fanspeed FanSpeedEventOn ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the fan speed
goes above or below the normal
operating range.
FanSpeedEventClear ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the fan speed
return to the normal operating range.