Chapter 6 Tutorials
ES3500 Series User’s Guide
62
4 Enter 1 for both Start VID and End VID since both the Switch and PPPoE server are in VLAN 1 in
this example. Click Apply.
5 Then select Yes to enable PPPoE IA in VLAN 1 and also select Circuit-id and Remote-id to allow
the Switch to add these two strings to frames tagged with VLAN 1 and pass to the PPPoE server.
Click Apply.
6.3.2 Configuring Switch B
The example uses another ES3500-24 as switch B.
To Next Page
Loading...
