Chapter 2 Hardware Installation and Connection
ES3500 Series User’s Guide
27
2.3.3 Mounting the Switch on a Rack
1 Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
up the two screw holes on the bracket with the screw holes on the side of the rack.
Figure 7 Mounting the Switch on a Rack (non-desktop models)
Figure 8 Mounting the Switch on a Rack (desktop models)
2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes
into the rack.
3 Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack.
To Next Page
Loading...
