ZyXEL Communications ES3500-24 - Page 295

Chapter 39 Access Control
ES3500 Series User’s Guide
295
poe PwrPortFailedEventOn ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the port is
turned off to supply power due to
overloading over system budget, or
short circuit.
PwrPortFailedEventClear ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the port returns
to the normal state and has the ability
to supply power
PsePwrFailedEventOn ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the power
supply of PoE failed. The trigger
situation includes internal/external
power supply failure, external fan
speed failure and external power has
exceed normal temperature.
PsePwrFailedEventClear ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the power
supply of PoE returns to the normal
state.
temperature TemperatureEventOn ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the temperature
goes above or below the normal
operating range.
TemperatureEventClear ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the temperature
returns to the normal operating range.
voltage VoltageEventOn ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
This trap is sent when the voltage goes
above or below the normal operating
range.
VoltageEventClear ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
This trap is sent when the voltage
returns to the normal operating range.
Table 127 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION