Chapter 5 Initial Setup Example
ES3500 Series User’s Guide
48
1 Click Advanced Application > VLAN in the navigation panel and click the Static VLAN link.
2In the Static VLAN screen, select ACTIVE, enter a descriptive name in the Name field and enter
2 in the VLAN Group ID field for the VLAN2 network.
Note: The VLAN Group ID field in this screen and the VID field in the IP Setup screen
refer to the same VLAN ID.
3 Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to configure port 1 to
be a permanent member of the VLAN only.
4 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.
To Next Page
Loading...
