Chapter 6 Tutorials
ES3500 Series User’s Guide
74
5 Select Fixed to configure ports 2, 3, 4 and 25 to be permanent members of this VLAN.
6 Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending frames out
of these ports.
7 Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
8 Click the VLAN Status link in the Static VLAN screen and then the VLAN Port Setting link in the
VLAN Status screen.
To Next Page
Loading...
