ZyXEL Communications GS1920 Series - 18.2 Port Authentication Configuration; 18.3 Activate IEEE 802.1 x Security

Chapter 18 Port Authentication
GS1920 Series User’s Guide
157
18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) (both on the Switch
and the port(s)), then configure the RADIUS server settings in the AAA > RADIUS Server Setup
screen.
Click Advanced Application > Port Authentication in the navigation panel to display the screen
as shown. Select a port authentication method’s link in the screen that appears.
Figure 114 Advanced Application > Port Authentication
18.3 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x
to display the configuration screen as shown.
Figure 115 Advanced Application > Port Authentication > 802.1x