ZyXEL Communications GS1920 Series - 9.3 VLAN Configuration; 9.4 Configure a Static VLAN

Chapter 9 VLAN
GS1920 Series User’s Guide
96
9.3 VLAN Configuration
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced Application
> VLAN > VLAN Configuration to see the following screen.
Figure 72 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
9.4 Configure a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click the Static VLAN Setup link in the
VLAN Configuration screen to display the screen as shown next.
Table 34 Advanced Application > VLAN > VLAN Configuration
LABEL DESCRIPTION
Static VLAN Setup Click Click Here to configure the Static VLAN for the Switch.
VLAN Port Setup Click Click Here to configure the VLAN Port for the Switch.
Subnet Based VLAN Setup Click Click Here to configure the Subnet Based VLAN for the Switch.
Protocol Based VLAN Setup Click Click Here to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup Click Click Here to configure the Voice VLAN for the Switch.
MAC Based VLAN Setup Click Click Here to configure the MAC Based VLAN for the Switch.