ZyXEL Communications GS1920 Series - 30.2 Error Disable Screen; 30.3 Error-Disable Status

Chapter 30 Error Disable
GS1920 Series User’s Guide
262
30.2 Error Disable Screen
Use this screen to go to the screens where you can configure error disable related settings. Click
Advanced Application > Errdisable in the navigation panel to open the following screen.
Figure 182 Advanced Application > Errdisable
30.3 Error-Disable Status
Use this screen to view whether the Switch detected that control packets exceeded the rate limit
configured for a port or a port is disabled according to the feature requirements and what action
you configure, and related information. Click the Click here link next to Errdisable Status in the
Advanced Application > Errdisable screen to display the screen as shown.