ZyXEL Communications GS2200 Series - Page 282

Chapter 37 Syslog
GS2200 Series User’s Guide
282
Click Management > Syslog in the navigation panel to display this screen. The syslog feature
sends logs to an external syslog server.
Figure 190 Management > Syslog
The following table describes the labels in this screen.
Table 119 Management > Syslog
LABEL DESCRIPTION
Syslog Select Active to turn on syslog (system logging) and then configure the syslog setting
Logging Type This column displays the names of the categories of logs that the device can generate.
Active Select this option to set the device to generate logs for the corresponding category.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.